| Internet-Draft | AEAD Limits | July 2022 |
| Günther, et al. | Expires 12 January 2023 | [Page] |
An Authenticated Encryption with Associated Data (AEAD) algorithm provides confidentiality and integrity. Excessive use of the same key can give an attacker advantages in breaking these properties. This document provides simple guidance for users of common AEAD functions about how to limit the use of keys in order to bound the advantage given to an attacker. It considers limits in both single- and multi-key settings.¶
This note is to be removed before publishing as an RFC.¶
Discussion of this document takes place on the Crypto Forum Research Group mailing list (cfrg@ietf.org), which is archived at https://mailarchive.ietf.org/arch/search/?email_list=cfrg.¶
Source for this draft and an issue tracker can be found at https://github.com/cfrg/draft-irtf-cfrg-aead-limits.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 12 January 2023.¶
Copyright (c) 2022 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
An Authenticated Encryption with Associated Data (AEAD) algorithm provides confidentiality and integrity. [RFC5116] specifies an AEAD as a function with four inputs -- secret key, nonce, plaintext, associated data (of which plaintext and associated data can optionally be zero-length) -- that produces ciphertext output and an error code indicating success or failure. The ciphertext is typically composed of the encrypted plaintext bytes and an authentication tag.¶
The generic AEAD interface does not describe usage limits. Each AEAD algorithm does describe limits on its inputs, but these are formulated as strict functional limits, such as the maximum length of inputs, which are determined by the properties of the underlying AEAD composition. Degradation of the security of the AEAD as a single key is used multiple times is not given the same thorough treatment.¶
Effective limits can be influenced by the number of "users" of a given key. In the traditional setting, there is one key shared between two parties. Any limits on the maximum length of inputs or encryption operations apply to that single key. The attacker's goal is to break security (confidentiality or integrity) of that specific key. However, in practice, there are often many users with independent keys. This multi-key security setting, often referred to as the multi-user setting in the academic literature, considers an attacker's advantage in breaking security of any of these many keys, further assuming the attacker may have done some offline work to help break security. As a result, AEAD algorithm limits may depend on offline work and the number of keys. However, given that a multi-key attacker does not target any specific key, acceptable advantages may differ from that of the single-key setting.¶
The number of times a single pair of key and nonce can be used might also be relevant to security. For some algorithms, such as AEAD_AES_128_GCM or AEAD_AES_256_GCM, this limit is 1 and using the same pair of key and nonce has serious consequences for both confidentiality and integrity; see [NonceDisrespecting]. Nonce-reuse resistant algorithms like AEAD_AES_128_GCM_SIV can tolerate a limited amount of nonce reuse.¶
It is good practice to have limits on how many times the same key (or pair of key and nonce) are used. Setting a limit based on some measurable property of the usage, such as number of protected messages or amount of data transferred, ensures that it is easy to apply limits. This might require the application of simplifying assumptions. For example, TLS 1.3 and QUIC both specify limits on the number of records that can be protected, using the simplifying assumption that records are the same size; see Section 5.5 of [TLS] and Section 6.6 of [RFC9001].¶
Exceeding the determined usage limit can be avoided using rekeying. Rekeying uses a lightweight transform to produce new keys. Rekeying effectively resets progress toward single-key limits, allowing a session to be extended without degrading security. Rekeying can also provide a measure of forward and backward (post-compromise) security. [RFC8645] contains a thorough survey of rekeying and the consequences of different design choices.¶
Currently, AEAD limits and usage requirements are scattered among peer-reviewed papers, standards documents, and other RFCs. Determining the correct limits for a given setting is challenging as papers do not use consistent labels or conventions, and rarely apply any simplifications that might aid in reaching a simple limit.¶
The intent of this document is to collate all relevant information about the proper usage and limits of AEAD algorithms in one place. This may serve as a standard reference when considering which AEAD algorithm to use, and how to use it.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
This document defines limitations in part using the quantities in Table 1 below.¶
| Symbol | Description |
|---|---|
| n | AEAD block length (in bits) |
| k | AEAD key length (in bits) |
| r | AEAD nonce length (in bits) |
| t | Size of the authentication tag (in bits) |
| l | Maximum length of each message (in blocks) |
| s | Total plaintext length in all messages (in blocks) |
| q | Number of protected messages (AEAD encryption invocations) |
| v | Number of attacker forgery attempts (failed AEAD decryption invocations) |
| p | Upper bound on adversary attack probability |
| o | Offline adversary work (in number of encryption and decryption queries; multi-key setting only) |
| u | Number of keys (multi-key setting only) |
| B | Maximum number of blocks encrypted by any key (multi-key setting only) |
For each AEAD algorithm, we define the (passive) confidentiality and (active) integrity advantage roughly as the advantage an attacker has in breaking the corresponding classical security property for the algorithm. A passive attacker can query ciphertexts for arbitrary plaintexts. An active attacker can additionally query plaintexts for arbitrary ciphertexts. Moreover, we define the combined authenticated encryption advantage guaranteeing both confidentiality and integrity against an active attacker. Specifically:¶
See [AEComposition], [AEAD] for the formal definitions of and relations between passive confidentiality (IND-CPA), ciphertext integrity (INT-CTXT), and authenticated encryption security (AE). The authenticated encryption advantage subsumes, and can be derived as the combination of, both CA and IA:¶
CA <= AEA IA <= AEA AEA <= CA + IA¶
Each application requires an individual determination of limits in order to keep CA and IA sufficiently small. For instance, TLS aims to keep CA below 2-60 and IA below 2-57 in the single-key setting; see Section 5.5 of [TLS].¶
Once upper bounds on CA, IA, or AEA are determined, this document defines a process for determining three overall operational limits:¶
When limits are expressed as a number of messages an application can encrypt or decrypt, this requires assumptions about the size of messages and any authenticated additional data (AAD). Limits can instead be expressed in terms of the number of bytes, or blocks, of plaintext and maybe AAD in total.¶
To aid in translating between message-based and byte/block-based limits, a formulation of limits that includes a maximum message size (l) and the AEAD schemes' block length in bits (n) is provided.¶
All limits are based on the total number of messages, either the number of protected messages (q) or the number of forgery attempts (v); which correspond to CL and IL respectively.¶
Limits are then derived from those bounds using a target attacker probability.
For example, given an integrity advantage of IA = v * (8l / 2^106) and a
targeted maximum attacker success probability of IA = p, the algorithm remains
secure, i.e., the adversary's advantage does not exceed the targeted probability
of success, provided that v <= (p * 2^106) / 8l. In turn, this implies that
v <= (p * 2^103) / l is the corresponding limit.¶
To apply these limits, implementations can count the number of messages that are protected or rejected against the determined limits (q and v respectively). This requires that messages cannot exceed the maximum message size (l) that is chosen.¶
This analysis assumes a message-based approach to setting limits. Implementations that use byte counting rather than message counting could use a maximum message size (l) of one to determine a limit for q that can be applied with byte counting. This results in attributing per-message overheads to every byte, so the resulting limit could be significantly lower than necessary. Actions, like rekeying, that are taken to avoid the limit might occur more often as a result.¶
This section summarizes the confidentiality and integrity bounds and limits for modern AEAD algorithms used in IETF protocols, including: AEAD_AES_128_GCM [RFC5116], AEAD_AES_256_GCM [RFC5116], AEAD_AES_128_CCM [RFC5116], AEAD_CHACHA20_POLY1305 [RFC8439], AEAD_AES_128_CCM_8 [RFC6655]. The limits in this section apply to using these schemes with a single key; for settings where multiple keys are deployed (for example, when rekeying within a connection), see Section 6.¶
These algorithms, as cited, all define a nonce length (r) of 96 bits. Some definitions of these AEAD algorithms allow for other nonce lengths, but the analyses in this document all fix the nonce length to r = 96. Using other nonce lengths might result in different bounds; for example, [GCMProofs] shows that using a variable-length nonce for AES-GCM results in worse security bounds.¶
The CL and IL values bound the total number of encryption and forgery queries (q and v). Alongside each advantage value, we also specify these bounds.¶
The CL and IL values for AES-GCM are derived in [AEBounds] and summarized below. For this AEAD, n = 128 and t = 128 [GCM]. In this example, the length s is the sum of AAD and plaintext (in blocks of 128 bits), as described in [GCMProofs].¶
CA <= ((s + q + 1)^2) / 2^129¶
This implies the following usage limit:¶
q + s <= p^(1/2) * 2^(129/2) - 1¶
Which, for a message-based protocol with s <= q * l, if we assume that every
packet is size l (in blocks of 128 bits), produces the limit:¶
q <= (p^(1/2) * 2^(129/2) - 1) / (l + 1)¶
IA <= 2 * (v * (l + 1)) / 2^128¶
This implies the following limit:¶
v <= (p * 2^127) / (l + 1)¶
The known single-user analyses for AEAD_CHACHA20_POLY1305 [ChaCha20Poly1305-SU], [ChaCha20Poly1305-MU] combine the confidentiality and integrity limits into a single expression, covered below. For this AEAD, n = 512, k = 256, and t = 128; the length l is the sum of AAD and plaintext (in blocks of 128 bits), see [ChaCha20Poly1305-MU].¶
AEA <= (v * (l + 1)) / 2^103¶
This advantage is a tight reduction based on the underlying Poly1305 PRF [Poly1305]. It implies the following limit:¶
v <= (p * 2^103) / (l + 1)¶
The CL and IL values for AEAD_AES_128_CCM are derived from [CCM-ANALYSIS] and specified in the QUIC-TLS mapping specification [RFC9001]. This analysis uses the total number of underlying block cipher operations to derive its bound. For CCM, this number is the sum of: the length of the associated data in blocks, the length of the ciphertext in blocks, the length of the plaintext in blocks, plus 1.¶
In the following limits, this is simplified to a value of twice the length of the packet in blocks, i.e., 2l represents the effective length, in number of block cipher operations, of a message with l blocks. This simplification is based on the observation that common applications of this AEAD carry only a small amount of associated data compared to ciphertext. For example, QUIC has 1 to 3 blocks of AAD.¶
For this AEAD, n = 128 and t = 128.¶
CA <= (2l * q)^2 / 2^n <= (2l * q)^2 / 2^128¶
This implies the following limit:¶
q <= sqrt((p * 2^126) / l^2)¶
IA <= v / 2^t + (2l * (v + q))^2 / 2^n <= v / 2^128 + (2l * (v + q))^2 / 2^128¶
This implies the following limit:¶
v + (2l * (v + q))^2 <= p * 2^128¶
In a setting where v or q is sufficiently large, v is negligible compared to
(2l * (v + q))^2, so this this can be simplified to:¶
v + q <= sqrt(p) * 2^63 / l¶
The analysis in [CCM-ANALYSIS] also applies to this AEAD, but the reduced tag length of 64 bits changes the integrity limit calculation considerably.¶
IA <= v / 2^t + (2l * (v + q))^2 / 2^n <= v / 2^64 + (2l * (v + q))^2 / 2^128¶
This results in reducing the limit on v by a factor of 2^64.¶
v * 2^64 + (2l * (v + q))^2 <= p * 2^128¶
An example protocol might choose to aim for a single-key CA and IA that is at most 2-50. If the messages exchanged in the protocol are at most a common Internet MTU of around 1500 bytes, then a value for l might be set to 27. Table 2 shows limits for q and v that might be chosen under these conditions.¶
| AEAD | Maximum q | Maximum v |
|---|---|---|
| AEAD_AES_128_GCM | 232.5 | 271 |
| AEAD_AES_256_GCM | 232.5 | 271 |
| AEAD_CHACHA20_POLY1305 | n/a | 246 |
| AEAD_AES_128_CCM | 230 | 230 |
| AEAD_AES_128_CCM_8 | 230.9 | 213 |
AEAD_CHACHA20_POLY1305 provides no limit to q based on the provided single-user analyses.¶
The limit for q on AEAD_AES_128_CCM and AEAD_AES_128_CCM_8 is reduced due to a need to reduce the value of q to ensure that IA does not exceed the target. This assumes equal proportions for q and v for AEAD_AES_128_CCM. AEAD_AES_128_CCM_8 permits a much smaller value of v due to the shorter tag, which permits a higher limit for q.¶
Some protocols naturally limit v to 1, such as TCP-based variants of TLS, which terminate sessions on decryption failure. If v is limited to 1, q can be increased to 231 for both CCM AEADs.¶
In the multi-key setting, each user is assumed to have an independent and uniformly distributed key, though nonces may be re-used across users with some very small probability. The success probability in attacking one of these many independent keys can be generically bounded by the success probability of attacking a single key multiplied by the number of keys present [MUSecurity], [GCM-MU]. Absent concrete multi-key bounds, this means the attacker advantage in the multi-key setting is the product of the single-key advantage and the number of keys.¶
This section summarizes the confidentiality and integrity bounds and limits for the same algorithms as in Section 5 for the multi-key setting. The CL and IL values bound the total number of encryption and forgery queries (q and v). Alongside each value, we also specify these bounds.¶
Concrete multi-key bounds for AEAD_AES_128_GCM and AEAD_AES_256_GCM exist due to Theorem 4.3 in [GCM-MU2], which covers protocols with nonce randomization, like TLS 1.3 [TLS] and QUIC [RFC9001]. Here, the full nonce is XORed with a secret, random offset. The bound for nonce randomization was further improved in [ChaCha20Poly1305-MU].¶
Results for AES-GCM with random, partially implicit nonces [RFC5288] are captured by Theorem 5.3 in [GCM-MU2], which apply to protocols such as TLS 1.2 [RFC5246]. Here, the implicit part of the nonce is a random value, of length at least 32 bits and fixed per key, while we assume that the explicit part of the nonce is chosen using a non-repeating process. The full nonce is the concatenation of the two parts. This produces similar limits under most conditions. Note that implementations that choose the explicit part at random have a higher chance of nonce collisions and are not considered for the limits in this section.¶
For this AEAD, n = 128, t = 128, and r = 96; the key length is k = 128 or k = 256 for AEAD_AES_128_GCM and AEAD_AES_128_GCM respectively.¶
Protocols with nonce randomization have a limit of:¶
AEA <= (q+v)*l*B / 2^127¶
This implies the following limit:¶
q + v <= p * 2^127 / (l * B)¶
This assumes that B is much larger than 100; that is, each user enciphers significantly more than 1600 bytes of data. Otherwise, B should be increased by 161 for AEAD_AES_128_GCM and by 97 for AEAD_AES_256_GCM.¶
Protocols with random, partially implicit nonces have the following limit, which is similar to that for nonce randomization:¶
AEA <= (((q+v)*o + (q+v)^2) / 2^(k+26)) + ((q+v)*l*B / 2^127)¶
The first term is negligible if k = 256; this implies the following simplified limits:¶
AEA <= (q+v)*l*B / 2^127 q + v <= p * 2^127 / (l * B)¶
For k = 128, assuming o <= q+v (i.e., that the attacker does not spend more work than all legitimate protocol users together), the limits are:¶
AEA <= (((q+v)*o + (q+v)^2) / 2^154) + ((q+v)*l*B / 2^127) q + v <= min( sqrt(p) * 2^76, p * 2^126 / (l * B) )¶
The confidentiality advantage is essentially dominated by the same term as the AE advantage for protocols with nonce randomization:¶
CA <= q*l*B / 2^127¶
This implies the following limit:¶
q <= p * 2^127 / (l * B)¶
Similarly, the limits for protocols with random, partially implicit nonces are:¶
CA <= ((q*o + q^2) / 2^(k+26)) + (q*l*B / 2^127) q <= min( sqrt(p) * 2^76, p * 2^126 / (l * B) )¶
There is currently no dedicated integrity multi-key bound available for AEAD_AES_128_GCM and AEAD_AES_256_GCM. The AE limit can be used to derive an integrity limit as:¶
IA <= AEA¶
Section 6.1.1 therefore contains the integrity limits.¶
Concrete multi-key bounds for AEAD_CHACHA20_POLY1305 are given in Theorem 7.8 in [ChaCha20Poly1305-MU], covering protocols with nonce randomization like TLS 1.3 [TLS] and QUIC [RFC9001].¶
For this AEAD, n = 512, k = 256, t = 128, and r = 96; the length l is the sum of AAD and plaintext (in blocks of 128 bits).¶
Protocols with nonce randomization have a limit of:¶
AEA <= (v * (l + 1)) / 2^103¶
It implies the following limit:¶
v <= (p * 2^103) / (l + 1)¶
Note that this is the same limit as in the single-user case except that the
total number of forgery attempts v and maximum message length in blocks l
is calculated across all used keys.¶
While the AE advantage is dominated by the number of forgery attempts v, those
are irrelevant for the confidentiality advantage. The relevant limit for
protocols with nonce randomization becomes dominated, at a very low level, by
the adversary's offline work o and the number of protected messages q
across all used keys:¶
CA <= (o + q) / 2^247)¶
This implies the following simplified limit, which for most reasonable values of
p is dominated by a technical limitation of approximately q = 2^100:¶
q <= min( p * 2^247 - o, 2^100 )¶
The AE limit for AEAD_CHACHA20_POLY1305 essentially is the integrity (multi-key) bound. The former hence also applies to the latter:¶
IA <= AEA¶
Section 6.2.1 therefore contains the integrity limits.¶
There are currently no concrete multi-key bounds for AEAD_AES_128_CCM or
AEAD_AES_128_CCM_8. Thus, to account for the additional
factor u, i.e., the number of keys, each p term in the confidentiality and
integrity limits is replaced with p / u.¶
The multi-key integrity limit for AEAD_AES_128_CCM is as follows.¶
v + q <= sqrt(p / u) * 2^63 / l¶
Likewise, the multi-key integrity limit for AEAD_AES_128_CCM_8 is as follows.¶
v * 2^64 + (2l * (v + q))^2 <= (p / u) * 2^128¶
An example protocol might choose to aim for a multi-key AEA, CA, and IA that is at most 2-50. If the messages exchanged in the protocol are at most a common Internet MTU of around 1500 bytes, then a value for l might be set to 27. Table 3 shows limits for q and v across all keys that might be chosen under these conditions.¶
| AEAD | Maximum q | Maximum v |
|---|---|---|
| AEAD_AES_128_GCM | 269/B | 269/B |
| AEAD_AES_256_GCM | 269/B | 269/B |
| AEAD_CHACHA20_POLY1305 | 2100 | 246 |
| AEAD_AES_128_CCM | 230/sqrt(u) | 230/sqrt(u) |
| AEAD_AES_128_CCM_8 | 230.9/sqrt(u) | 213/u |
The limits for AEAD_AES_128_GCM, AEAD_AES_256_GCM, AEAD_AES_128_CCM, and AEAD_AES_128_CCM_8 assume equal proportions for q and v. The limits for AEAD_AES_128_GCM, AEAD_AES_256_GCM and AEAD_CHACHA20_POLY1305 assume the use of nonce randomization, like in TLS 1.3 [TLS] and QUIC [RFC9001].¶
The limits for AEAD_AES_128_GCM and AEAD_AES_256_GCM further depend on the maximum number B of 128-bit blocks encrypted by any single key. For example, limiting the number of messages (of size <= 27 blocks) to at most 220 (about a million) per key results in B = 227, which limits both q and v to 242 messages.¶
Only the limits for AEAD_AES_128_CCM and AEAD_AES_128_CCM_8 depend on the number of used keys u, which further reduces them considerably. If v is limited to 1, q can be increased to 231/sqrt(u) for both CCM AEADs.¶
The different analyses of AEAD functions that this work is based upon generally assume that the underlying primitives are ideal. For example, that a pseudorandom function (PRF) used by the AEAD is indistinguishable from a truly random function or that a pseudorandom permutation (PRP) is indistinguishable from a truly random permutation. Thus, the advantage estimates assume that the attacker is not able to exploit a weakness in an underlying primitive.¶
Many of the formulae in this document depend on simplifying assumptions, from differing models, which means that results are not universally applicable. When using this document to set limits, it is necessary to validate all these assumptions for the setting in which the limits might apply. In most cases, the goal is to use assumptions that result in setting a more conservative limit, but this is not always the case. As an example of one such simplification, this document defines v as the total number of failed decryption queries (that is, failed forgery attempts), whereas models usually count in v all forgery attempts.¶
The CA, IA, and AEA values defined in this document are upper bounds based on existing cryptographic research. Future analysis may introduce tighter bounds. Applications SHOULD NOT assume these bounds are rigid, and SHOULD accommodate changes. In particular, in two-party communication, one participant cannot regard apparent overuse of a key by other participants as being in error, when it could be that the other participant has better information about bounds.¶
Note that the limits in this document apply to the adversary's ability to conduct a single successful forgery. For some algorithms and in some cases, an adversary's success probability in repeating forgeries may be noticeably larger than that of the first forgery. As an example, [MF05] describes such multiple forgery attacks in the context of AES-GCM in more detail.¶
This document does not make any request of IANA.¶